Regenerative braking is a technique that allows the energy generated during braking to be recovered and stored in the battery pack. While regenerative braking is commonly used in electric vehicles, its availability in Easy Bikes/E-TukTuks may depend on the specific model. If your Easy Bike/E-TukTuk supports regenerative braking, it can help improve overall efficiency and extend the range of the vehicle. If your vehicle has this feature share with ENSEC before installing the Pack. Others wise it will be considered as warranty void if you connect this feature with ENSEC Battery Pack.

ENSEC Lithium battery packs for Easy Bikes/E-TukTuks are generally safe when used and maintained properly. However, like any other energy storage system, there are some safety considerations to keep in mind, such as avoiding overcharging, using appropriate charging equipment, and following manufacturer guidelines for storage and handling.

ENSEC offers 2 years replacement warranty and next 3 years’ service warranty. So altogether 5 years’ service warranty. The lifespan of a lithium battery pack for an Easy Bike/E-TukTuk can vary depending on factors such as usage patterns, charging practices, operating conditions, and the specific chemistry of the battery pack. On average, a well-maintained ENSEC lithium battery pack can last anywhere from 4 to 5+ years or more. It’s important to note that the capacity of the battery pack gradually decreases over time, resulting in reduced range.

Using a solar panel to charge a lithium battery pack for an Easy Bike/E-TukTuk is possible. It requires an appropriate solar charging system that matches the voltage and charging characteristics of the battery pack. Solar charging can offer a sustainable and environmentally friendly way to recharge the battery pack, especially in off-grid or remote locations with access to sunlight. Without ENSEC’s recommended solar charging facilities and charger will be considered as warranty void.

Charging a lithium battery pack for an Easy Bike/E-TukTuk with a generator is possible, provided that the generator output matches the charging requirements of the battery pack. It’s important to ensure compatibility and use a generator with stable power output to avoid any potential damage to the battery pack.

ENSEC Lithium battery packs do not require a full discharge before recharging. In fact, it is generally recommended to avoid deep discharges, as it can degrade the battery’s lifespan. Lithium Battery Pack for your Easy Bike is very similar to your Cellphone battery.

ENSEC Lithium battery packs are designed to handle continuous charging without any adverse effects on their performance or safety. Our lithium battery packs have built-in protection circuits that prevent overcharging. However, it’s always a good practice to follow the ENSEC’s recommendations regarding charging to ensure optimal battery health.

The most common lithium battery chemistries used in Easy Bike/E-TukTuk battery packs are lithium iron phosphate (LiFePO4), lithium nickel manganese cobalt oxide (NMC), and lithium polymer (LiPo). ENSEC have both solutions.

No. Charge only with ENSEC recommended charger to ensure warranty. Charger is required to convert the 240 V AC to DC voltage to match with the type of Battery Pack.

With ENSEC Recommended charger overcharge is not possible.

When storing a lithium battery pack for an Easy Bike/E-TukTuk, it is recommended to keep it in a cool and dry place, away from direct sunlight and extreme temperatures. It’s also advisable to store the battery with a partial charge (around 40-60%) to maintain optimal health. But ensure charging the battery pack after every 10~15 days. Once the battery is fully charged, it typically loses 3% charge per month.

The weight of a lithium battery pack can vary depending on its capacity and design. ENSEC packs are 60Kg to 80Kg

ENSEC lithium battery packs are designed to be compatible with specific voltage and required AH. Yes, you can use our lithium battery pack in any Easy Bike/E-TukTuk in Bangladesh. Moreover, we also produce customized solution in all E-Mobility Sectors, such as E-Bus, E-Truck and E-Forklifts.

Using a higher capacity lithium battery pack in your Easy Bike/E-TukTuk can potentially increase the vehicle’s range, allowing for longer rides between charges. However, it is important to ensure that the electrical system and charging infrastructure of the vehicle can handle the higher capacity battery pack. You can choose from below : 1.      60V180AH 2.      60V142AH 3.      48V86AH 4.      48V100AH

Using a lower capacity lithium battery pack in your Easy Bike/E-TukTuk may result in reduced range and performance. It is recommended to use a battery pack with a capacity that meets or exceeds the requirements of your vehicle for optimal performance.

For this type of upgradation always consult with ENSEC recommended service center for warranty safety as well as the vehicle’s safety. Using multiple lithium battery packs in parallel can potentially increase the range of your Easy Bike/E-TukTuk. However, it requires careful consideration of the electrical connections, balancing, and management systems to ensure proper functioning and safety.

No and NOT RECOMMENDED.

“To maximize the lifespan of a lithium battery pack, it is advisable to follow these guidelines:
– Use ENSEC recommended charger
– Charge the battery pack regularly, even if not in use for an extended period.
– Store/Park the battery/ Easy Bike/E-TukTuk in a cool and dry place.
– Follow the ENSEC recommendations for maintenance and care.”

ENSEC provided display and your Easy Bike/E-TukTuk dashboard.

If a lithium battery pack is damaged or not functioning correctly, it is recommended that you contact ENSEC customer care or nearest service point immediately.

No

Yes

“When choosing a lithium battery pack for an Easy Bike/E-TukTuk, it’s important to look for safety features such as:
– Temperature Control Pressure Relieve Valve.
– Shock Absorption, Dent Proofing the Casing.
– Over Charge and Discharge Protection.
– Proper mounting with the Easy Bike body frame.
– Install Circuit Breaker.”

“ENSEC Lithium battery packs offer several advantages over other types of batteries, including:
– High energy density: Lithium batteries have a high energy-to-weight ratio, allowing them to store a significant amount of energy in a compact and lightweight package.
– Longer lifespan: ENSEC Lithium batteriey Pack typically have a longer cycle life compared to other battery chemistries, meaning they can withstand a larger number of charge-discharge cycles before their capacity significantly degrades.
– Faster charging: Lithium batteries can be charged at faster rates compared to many other battery types, allowing for shorter charging times.
– High power output: Lithium batteries can deliver high levels of power, making them suitable for applications that require bursts of energy or high-power demands.
– Low self-discharge: ENSEC Lithium batteries have a low self-discharge rate, meaning they retain their charge for longer periods when not in use.
– No memory effect: Lithium batteries do not suffer from the memory effect, so they do not require complete discharge before recharging.
– ENSEC designed their battery pack by analyzing local requirements, vehicle types, road condition as well as natural diversity of Bangladesh. Meaning ENSEC battery pack last for 5/+ years without maintenance”

“Yes, there are several different lithium battery chemistries used in Easy Bikes/E-TukTuks. The most common ones include:
– Lithium-ion (Li-ion)/ NMC: Li-ion batteries are widely used in various applications, including electric vehicles. They offer a good balance between energy density, power output, and lifespan. ENSEC offers NMC for 60V180Ah battery pack.
– Lithium iron phosphate (LiFePO4)/ LFP: LiFePO4 batteries are known for their high thermal and chemical stability, making them safer than some other lithium battery chemistries. They have a slightly lower energy density but offer a longer lifespan and better performance in high-temperature environments. ENSEC offers LFP for 48V86/100Ah and 60V142Ah battery packs. “

No

“Yes, there are important safety considerations when using a lithium battery pack, including:
– Avoiding physical damage to the battery pack, such as punctures or impacts, which can lead to internal short circuits or thermal runaway.
– Using a charger specifically designed for lithium batteries and following the ENSEC’s instructions for proper charging procedures.
– Avoiding overcharging or deep discharging the battery pack, as it can reduce its lifespan and potentially cause safety hazards.
– Protecting the battery pack from extreme temperatures, both hot and cold, as it can affect performance and safety.
– Monitoring the battery pack for any signs of swelling, leakage, or unusual behavior, and seeking professional assistance if any issues arise”

“To extend the lifespan of a lithium battery pack, you can follow these guidelines: Avoid deep discharges: Try to keep the battery pack’s state of charge above 20% to minimize stress on the cells.
– Avoid extreme temperatures: Operate and store the battery pack within the recommended temperature range to prevent accelerated aging.
– Use compatible chargers: Ensure that the charger you use is specifically designed for ENSEC lithium batteries and follows the recommended charging parameters.
– Avoid prolonged storage at full charge or empty: If you’re not using the Easy Bike/E-TukTuk for an extended period, store the battery pack at around 50% charge in a cool and dry environment.
– Regularly maintain the battery pack: Periodically inspect the battery pack for any physical damage, clean the contacts, and follow the ENSEC’s guidelines for maintenance”

“Yes, there are several environmental benefits associated with using lithium battery packs in Easy Bikes/E-TukTuks:
– Reduced greenhouse gas emissions: Easy Bikes/E-TukTuks powered by lithium battery packs produce zero tailpipe emissions, helping to reduce the overall greenhouse gas emissions and air pollution associated with transportation.
– Lower carbon footprint: Lithium battery packs can be charged using electricity from renewable energy sources, such as solar or wind power, further reducing their carbon footprint. Also, compared to Acid Battery, 70% less coal has to be burned at the power plant to fully charge a Lithium Battery.
– Energy efficiency: Lithium battery packs have high energy efficiency, allowing Easy Bikes/E-TukTuks to travel longer distances on a single charge compared to conventional fuel-powered vehicles. You can use the battery up to 95% just like your cellphone, whereas acid battery you can use up to 50%.
– Noise reduction: Electric vehicles powered by lithium battery packs operate quietly, contributing to a reduction in noise pollution in urban areas.
– No acid corrosion on the Easy Bike body frames.
– Acid Battery recycling process in poisonous. Whereas Lithium Battery recycling is clean and can recover 95% of the earth materials.
– After 5 years of using the Lithium Battery in your Easy bike, you can use the same battery for another 10 to 15 years for storing energy from Solar Panels. You can actually recycle the battery after 20 years of usage.”

“A lithium battery pack for an Easy Bike/E-TukTuk typically consists of several key components:
– Lithium-ion cells: These are the individual battery cells that store and release energy. They are connected in series or parallel configurations to achieve the desired voltage and capacity.
– Battery management system (BMS): The BMS is responsible for monitoring and controlling the battery pack’s operation. It regulates charging and discharging, monitors cell voltage and temperature, provides overcurrent and overvoltage protection, and balances the charge levels among the cells.
– Enclosure: The battery pack is housed in a protective enclosure that safeguards the cells and other components from external elements and mechanical damage.
– Connectors and wiring: The battery pack includes connectors and wiring to facilitate the connection to the Easy Bike/E-TukTuk’s electrical system and the charging infrastructure.
– Thermal management system: ENSEC battery packs incorporate a thermal management system to regulate the temperature of the cells, ensuring optimal performance and safety.
– Pressure switch.
– IOT
– Optional Display”

“Several factors can influence the performance of a lithium battery pack for an Easy Bike/E-TukTuk:
– Charger & Voltage: The two biggest issues are Bad Charger Connector and Voltage drop from the Power Utility Company. If you do not use a ENSEC recommended charging connectors, the loose charger connection will damage the battery pack.In Bangladesh power quality is unstable. Voltage fluctuations such as low voltage or high voltage spikes will damage the battery pack. Always use a ENSEC recommended Lithium Battery Chargers. You will get the best performance from ENSEC EV chargers are custom designed for our customers from our suppliers only specific to our needs for Bangladesh environment.
– Temperature: Lithium batteries perform best within a specific temperature range. Extreme temperatures, both hot and cold, can affect the battery’s capacity, charging efficiency, and overall performance. ENSEC battery shut-offs automatically once the temperature exceeds 65 degree Celsius. In Bangladesh tropical climate, we do not have to worry about the cold temperature.
– Other factors can be high Discharge rate, Continuous high-current draw, number of charge-discharge cycles, Factors such as depth of discharge, charging voltage, and operating temperature can affect the cycle life. Mentioned on every Battery pack of ENSEC.
– Aging: Over time, lithium battery packs may experience a gradual reduction in capacity and performance due to internal chemical reactions and physical changes within the cells.
– Storage conditions: If the battery pack is not in use, proper storage conditions are essential to maintain its performance and lifespan. Storing the battery pack at high temperatures or in a fully discharged state for extended periods can lead to capacity loss and potential damage.”

“The cost of a lithium battery pack for an Easy Bike/E-TukTuk can vary depending on factors such as capacity, ENSEC Current offer are (*Excluding Charger)
– 1. 60V180AH MRP 1,85,000 Taka
2. 60V142AH MRP 1,70,000 Taka
3. 48V86AH MRP 1,20,000 Taka
4. 48V100AH MRP 1,35,000 Taka
*Charger price: 10,000 to 15,000 Taka 15A charger. For 20 A to 40A chargers Price will be 25k to 45k.”

The energy capacity of a lithium battery pack for an Easy Bike/E-TukTuk can vary depending on the specific model and configuration. Energy capacity is measured in watt-hours (Wh), For example, a 48 V battery pack with a current capacity of 100Ah has a capacity of 48 x 100 = 4800Wh. Ampere-hours (Ah) and KWh is not the same thing. As the name suggests, Ah this means how many amps the battery can deliver in an hour. For example, a 12V lithium battery with a capacity of 100Ah can deliver 100A to a 12-volt device for one hour. The same 100Ah battery could supply power for 4 hours (100/25=4) to a 25-ampere device.

After 5 years of using the Lithium Battery in your Easy bike, you can use the same battery for another 10 to 15 years for storing energy from Solar Panels. You can actually recycle the battery after 20 years of usage. In the future there will be government or private programs to collect these batteries for recycling. Lithium battery packs should not be disposed of. Contact ENSEC for more details.

ENSEC Lithium battery packs for Easy Bikes/E-TukTuks are water resistant, but prolonged exposure to heavy rain or immersion in water can damage the battery pack and pose safety risks. It’s important to follow the ENSEC’s guidelines for waterproofing and ensure proper sealing and protection of the battery pack in wet conditions.

The charging time for a lithium battery pack can vary depending on its capacity, the charging method used, and the charging infrastructure. Typically, it can take anywhere from 3 to 6 hours to fully charge an ENSEC lithium battery pack for an Easy Bike/E-TukTuk.

ENSEC Lithium battery packs for Easy Bikes/E-TukTuks generally doesn’t require minimal maintenance. However, it’s important to periodically inspect the battery pack for any physical damage, ensure proper charging using compatible equipment, and follow the ENSEC’s guidelines for cleaning, and maintenance. Regularly monitoring the battery’s performance and state of charge can also help identify any potential issues.

The lifespan of a lithium battery pack can vary depending on factors such as usage patterns, operating conditions, and maintenance practices. Over time, the battery pack’s capacity will gradually decrease, resulting in reduced range and operating time. When the battery pack no longer meets your desired performance requirements, it may be time for replacement. Additionally, if you notice significant changes in the battery pack’s behavior, such as unusually fast discharging or rapid voltage drops, it could indicate a malfunctioning or deteriorating battery pack that may need repair or partial replacement. In most cases, Full Battery Pack replacement is not needed for 5 years. However, after 5 years, this same battery pack can last for another 10 plus years for storing energy from solar panels for your home or commercial applications. Total 15 plus years!